Travel Racks

maximum lockdown, minimum size

We've made the Curve travel racks as small as possible to squeeze into your boardbag when travelling overseas. To make the racks more compact, we've used mini foam squabs to protect vehicle roof and surfboards at points of contact, so you get maximum protection at a mimimum size. More than just tiedowns, the same patented system as the lockdown racks is used, so you can relax knowing the 350kg breaking strain is the same no matter where you are.

• downward force system virtually eliminates surfboard movement.
• conveniently sized to take up minimal space.
• mini-squabs protect vehicle roof and boards at contact points.
• 3 connection methods: thru doors, loadbars or gutters/sills.
• quick and easy to use with single tightening point.
• breaking strain tested to 350kg.
• fit any vehicle with a roof.
• webbing doesn't run along roof so less potential for damage.
• easy board access via top load hook.
• holds 1-6 shortboards or 1-3 longboards.

• zinc plated spring loaded camlock.
• custom design solid steel loadhook with protective coating

• Reduce vibrations / wind noise by adding a twist to top straps before connecting.
• Position camlock and hook away from rails of surfboards. Adjust by repositioning or changing length of strap.
• for best tightening straps should be spread on surfboard rails.
• always tie off straps around camlock to prevent unintentional release.
• when removing surfboards via top hook ease tension on straps first by releasing camlock.
• camlock is designed to bite into webbing. If stiff to release, pull on free strap to reduce tension while depressing camlock lever.
• max load 6 shortboards or 3 longboards.
• softracks may cause leakage in wet weather or possible damage to door rubber. To avoid this connect via an external means where possible, eg via vehicle gutters or loadbars.
• operational information PDF (82KB)